is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Clean Edges and Corners
1 Sandpaper
2 Sanding block
3 Paint scraper
4 Putty knife
5 Caulking gun
6 Painter's tape
7 Paintbrush
8 Paint roller
9 Paint tray
10 Dust mask

Clean Edges and Corners

Get a Flawless Finish with Clean Edges and Corners

Clean edges and corners are essential for any professional-looking project, whether it's painting a room, installing tile, or even just trimming fabric. Here's a step-by-step guide to achieving clean edges and corners every time.

Step 1: Prep the area
Before you begin any project, make sure the area you'll be working on is clean and free of debris. This will ensure that your tools can move smoothly and won't be impeded by any obstacles.

Step 2: Use painter's tape
For painting projects, use painter's tape to mask off any areas you don't want to paint. Apply the tape carefully, making sure it's straight and flush against the surface. Use a putty knife or similar tool to press the tape down firmly, especially at the edges and corners.

Step 3: Use a cutting tool
When cutting materials like fabric or wallpaper, use a cutting tool like a rotary cutter or utility knife. Make sure the blade is sharp and replace it as needed. Use a straight edge or ruler to guide your cuts and keep them straight.

Step 4: Check your work
As you work, periodically step back and check your progress. Look for any areas that need touch-ups or adjustments. If you notice any mistakes or imperfections, address them before moving on to the next step.

Step 5: Remove the tape
Once you've finished painting, let the paint dry completely before removing the painter's tape. Remove the tape slowly and at a 45-degree angle to avoid damaging the paint or leaving behind any residue.

Step 6: Clean up
After you've completed your project, clean up any materials and tools you used. Store them properly so they'll be ready for your next project.

Following these steps will help you achieve clean edges and corners on any project, giving your work a professional and polished look.